BBTHX : Beer storage tanks – with horizontal orientation
The horizontal orientation of the tanks is practical in breweries with insufficient height of the room dedicated for the location of the beer storage tanks.
Horizontal beer tanks can be installed in several levels to maximize number of tanks according to the available room height.
The main disadvantage of horizontally oriented tanks is, in particular, poor access to hidden parts of the tank, where is accumulated dirt, which can be the source of unwanted infections of yeast and beer.
We recommend the horizontal beer tanks only for breweries with a really low ceiling height in the beer cellar.
We offer two variations of this type beer tank :
I. BBTHI – Pressure cylindrical BBT tanks, horizontal, insulated
Insulated beer storage tanks cooled with liquid is professional solution for all breweries for whom the savings of operating costs are at the very first place. Tanks include double cooling channels and the cooling liquid pours throug them (water or glycol) and what’s more the tanks have a cylindrical part (for extra surcharge both bottoms could be insulated) insulated with PUR foam. The outer jacket is covered with insulation and it creates a clean design of stainless steel tank. It is possible to place the tanks in a non-insulated room because insulation provides the protection against unwanted escape of cold nearby the tanks. Their advantage is all above their low electric consumption when the tanks are cooled, the need of the less powerful liquid cooler and better comfort for operators who may not work in cold room.
Our production portfolio – Pressure cylindrical BBT tanks, horizontal, insulated
- BBTHI-4000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 4000/4258 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 4000 liters and total volume 4258 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-5000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 5000/5900 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 5000 liters and total volume 5900 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-6000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 6000/6905 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 6000 liters and total volume 6905 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-7000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 7000/7855 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 7000 liters and total volume 7855 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-8000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 8000/8538 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 8000 liters and total volume 8538 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-9000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 9000/9955 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 9000 liters and total volume 9955 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-10000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 10000/11110 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 10000 liters and total volume 11110 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-12000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 12000/13468 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 12000 liters and total volume 13468 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- BBTHI-800C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, insulated, 800/959 liters, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank). This type of the beverage-production tank is equipped with a horizontal stackable construction, with PUR insulation and double jacket that is cooled by ice water or glycol. This tank has usable volume 800 liters and total volume 959 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel is available… Read more »
- PED-C : PED 2014/68/EU – the European certificate for the pressure equipmentThe PED certificate is a necessary document for every pressure device with a permissible pressure greater than 0.5 bar (0.5 MPa), which is intended for use in European countries and in other countries that use and accept European technical standards. Read more »
… more tanks with other volumes
II. BBTHN – Pressure cylindrical BBT tanks, horizontal, non-insulated
These cylindrical pressure tanks have the easiest construction and so it is possible to buy them for the lowest price. The beer tanks are in mono-jacketed version without any double cooling channels. Tanks have to be placed in insulated chilled room, where the space is cooled with air cooling unit. Their advanatage is their low purchase cost. And their disadvantage is that the temperature in each tank cannot be regulated regardless of the other tanks and the human operator comfort is lower because opertors work in cold and humid surroundings. The electric consumption is higher when tanks are cooled with air and not with the liquid. But this type of tank is the mostly used in craft breweries because of the investment savings.
Our production portfolio – Pressure cylindrical BBT tanks, horizontal, non-insulated
- BBTHN-1500C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 1500/1717L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 1500 liters and total volume 1717 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-2000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 2000/2242L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 2000 liters and total volume 2242 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-2500C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 2500/2637L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 2500 liters and total volume 2637 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-3000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 3000/3130L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 3000 liters and total volume 3130 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-4000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 4000/4258L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 4000 liters and total volume 4258 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-5000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 5000/5900L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 5000 liters and total volume 5900 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-6000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 6000/6905L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 6000 liters and total volume 6905 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-7000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 7000/7855L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 7000 liters and total volume 7855 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- BBTHN-8000C : Cylindrical pressure tank for storage and final conditioning of carbonated beverage before bottling, horizontal, non-insulated, 8000/8538L, 0.5/1.5/3.0barThe cylindrical storage tank for final work with purified beverage (called also serving tank, filling tank, service tank, storage tank, BBT - Bright beer tank) . This type of the beverage-production tank is equipped with a horizontal stackable construction, it is without insulation therefore it is designed to cooling by air from outside space. This tank has usable volume 8000 liters and total volume 8538 liters. This professional equipment is designed to storage, serving, carbonization, filtration of beer, cider, wine and other beverages under pressure, and also for preparation of beverages before their filling into kegs or bottles. The vessel… Read more »
- PED-C : PED 2014/68/EU – the European certificate for the pressure equipmentThe PED certificate is a necessary document for every pressure device with a permissible pressure greater than 0.5 bar (0.5 MPa), which is intended for use in European countries and in other countries that use and accept European technical standards. Read more »